Windows

Sort By:  
Window #3 over wide entrance base panel. (WM552)
1 window 1" wide 1-3/8" high Unpainted O Guage. The following windows are designed to be inserted into a wall 1/8"thick from the rear. They are cast with a mounting lip or flange that can be filed narrower to create an internal window frame. Personally I use 1/8" styrene sheet stock for my walls. Fiber board or a Matte board produce could also be used.
Add to Cart
0.96€
Window #2 over wide entrance base panel. (WM551)
1 window 1" wide 1-1/2" high Unpainted O Guage. The following windows are designed to be inserted into a wall 1/8"thick from the rear. They are cast with a mounting lip or flange that can be filed narrower to create an internal window frame. Personally I use 1/8" styrene sheet stock for my walls. Fiber board or a Matte board produce could also be used.
Add to Cart
0.96€
Window #10 over wide entrance base panel. (WM559)
1 window 1-1/8 wide 1-5/8" high Unpainted O Guage. The following windows are designed to be inserted into a wall 1/8"thick from the rear. They are cast with a mounting lip or flange that can be filed narrower to create an internal window frame. Personally I use 1/8" styrene sheet stock for my walls. Fiber board or a Matte board produce could also be used.
Add to Cart
0.96€
Window #7 over wide entrance base panel. (WM556)
1 window 7/8" wide 1-5/8" high Unpainted O Guage. The following windows are designed to be inserted into a wall 1/8"thick from the rear. They are cast with a mounting lip or flange that can be filed narrower to create an internal window frame. Personally I use 1/8" styrene sheet stock for my walls. Fiber board or a Matte board produce could also be used.
Add to Cart
0.96€
Window #14 Dormer roof window (WM563)
1 window set with a solid spacer between windows each window 1-1/8" wide 1-3/8" high Unpainted O Guage. The following windows are designed to be inserted into a wall 1/8"thick from the rear. They are cast with a mounting lip or flange that can be filed narrower to create an internal window frame. Personally I use 1/8" styrene sheet stock for my walls. Fiber board or a Matte board produce could also be used.
Add to Cart
0.96€
Gothic window header (WM98A)
The following castings are to ease a modelers task in creating a window wall in conjunction with windows 10, 11, or 12 above using portions of this casting. 1 resin panel unpainted 3-1/2" wide 1-3/4" high 1/8" thick O, S, HO Guage. New Haven CT City Hall, Gothic Model Project
Add to Cart
2.30€
Gothic Window #13 (WM97)
1 resin window 2 resin side panels window 3-3/4" high 2-1/8" wide at top 1/4" deep Side panels 3-1/16" high 3/4" wide at top If used sets into side of window for dormer. Used for bell tower opening on all four sides O Guage. New Haven CT City Hall, Gothic Model Project
Add to Cart
6.91€
Gothic Window #11 (WM95)
1 resin window unpainted 3-" high 1-1/8" wide 1/4" deep O, S, HO Guage. New Haven CT City Hall, Gothic Model Project
Add to Cart
3.45€
Window #9 over wide entrance base panel. (WM558)
1 window 1-1/8 wide 2" high Unpainted O Guage. The following windows are designed to be inserted into a wall 1/8"thick from the rear. They are cast with a mounting lip or flange that can be filed narrower to create an internal window frame. Personally I use 1/8" styrene sheet stock for my walls. Fiber board or a Matte board produce could also be used.
Add to Cart
0.96€
Gothic window #2 (WM81)
1 resin window unpainted 2-13/16" high 2" wide 7/16" deep O Guage. New Haven CT City Hall, Gothic Model Project
Add to Cart
3.84€
Small Window Frame (WM578)
1 window frame unpainted 13/16" wide 1-1/4" high 1/4" deep Windows are cut out O Guage. Brick switch tower project
Add to Cart
0.77€
First floor narrow entrance panel door on left (WM505)
1 module 4-3/4" wide 3-1/4" high Unpainted O Guage. City Houses ( row of early NYC block houses) project, city house base
Add to Cart
4.61€
Single sash (WM702)
"Single sash unpainted 2-5/8"" high 1-5/8"" wide 3/16"" deep O Guage. Uncle Joe's Print Shop project "
Add to Cart
1.54€
Gothic window #5 (WM85)
1 resin window unpainted 2-1/4" high 15/16" wide 5/16" deep O, S, HO Guage. New Haven CT City Hall, Gothic Model Project
Add to Cart
2.69€
First floor duel window panel (WM502)
1 module 5-1/4" wide 3-1/4" high Unpainted O Guage. City Houses ( row of early NYC block houses) project, city house base
Add to Cart
4.61€
Window #1 over wide entrance base panel. (WM550)
1 window 1" wide 2" high Unpainted O Guage. The following windows are designed to be inserted into a wall 1/8"thick from the rear. They are cast with a mounting lip or flange that can be filed narrower to create an internal window frame. Personally I use 1/8" styrene sheet stock for my walls. Fiber board or a Matte board produce could also be used.
Add to Cart
0.96€
Per Page      1 - 20 of 53